I feel like it should be “Jean”, non? If it was a Fiat or an Alfa Romeo, Giovanni would be a great fit. Maybe you have your own context or reasoning though ☺️.
I feel like it should be “Jean”, non? If it was a Fiat or an Alfa Romeo, Giovanni would be a great fit. Maybe you have your own context or reasoning though ☺️.
Yeah it exported for me into the folder and file format I specified. Tile was expectedly large and there was a thumbnail preview, but when I tried to open it, the two image viewers I tried gave the same error message. I’ll try it again at some point for sure though.
Very cool piece of software. I played around with it a few weeks back with some scanned slides and it gave good results. Some of the models were better for general objects and background while other models were better for people.
The only issue was (and I admittedly didn’t spend any time to try and resolve it), that I couldn’t open the output photos outside of the app. I could see the result in the app, but opening the file directly gave an error.
I found the three newish Tomb Raider games to be a great mix of a sort of open world feel at times where you have things to explore, while being very much on rails. Each arc in the story gives you an area to explore and your actions in that area progress the story. You get some weapon and ability upgrades throughout. I came in not expecting much and couldn’t put the first one down. I think I finished Tomb Raider 2013 to 100% in about 20-25 hours and it was excellent. Will probably do another playthrough at some point, still haven’t played the third.
Depends on the ISP. Many don’t allow you to use one they didn’t provide.
You don’t have to rebuild the proxmox hosts to remove the cluster. I made the same mistake last year sometime and was able to remove the cluster and each of the proxmox machines works as it should standalone. I don’t recall the exact steps but it was very easy. A quick search for “proxmox remove cluster” gave me this result and from what I recall these are the steps I followed as well. https://rostislavjadavan.com/posts/promox-delete-cluster
This looks cool, and there is an itinerary plugin as well. And a community workaround to self host syncing. I’ll check it out, thanks!!
Gotcha, I’ll check that out.
Unless I can find something better I’ll just use a combination of Joplin and a spreadsheet for now, and maybe make a little self hosted solution as I figure out my own needs.
This is close to what I’m looking for, but won’t work on my iOS device while travelling. Can KDE apps live alongside a Gnome DE? I’ve never had a need to look into it.
This could work, yeah. I already use Organic maps so fits. I’ve seen a trip planning notion template, but I use self hosted Joplin so maybe I can adapt it for now.
Maybe I’ll work on an actual app myself though. I’m not super knowledgeable but could do something basic. Could be a fun project to work on in the spring.
This is ringing bells from like 2018 when I was last looking at this kind of stuff. Maybe they abandoned it or it became one of the available paid apps or something.
I feel like I’ve seen something like this as well but can’t find any reference. Lots of open source trip planner hits, but for routing a drive, not for a trip itinerary/planning.
I read this a lot as well, and I think for a time this was true, but in my experience with a 1070 and 1080ti, Ubuntu and Fedora worked fine with minor tinkering, pop_os and nobara work out of the box. Currently on nobara, and most apps and games work just as well if not a little better than on Windows. A mate of mine runs nobara with a 3080 and no issues there either.
I’m only considering this because of some articles I read that went over it, but they were a few years old. I could see how that could get annoying though, just with the frustration I’m experienced now with multiple drives.
I don’t think the system and apps exceed 40GB to be honest, the rest is filled with steam library and video/photo scratch that will move to the NAS once that’s done.
Thanks for throwing me down a rabbit hole lol, I learned so much today. I spent a good chunk of the day researching this stuff, and found a couple of options. Came across these HP NC522SFP 10Gb NICs, someone selling 2 for under $100. My understanding is I can pair these with the generic DACs at FS.com (thanks for sharing this btw) and any 10Gb SFP switch, and I will be able to get the 10Gb link? And right, a transceiver to get the link from the ISP to the router.
I still have to do the runs for the second floor and other half of the main, but the basement is done. The whole NAS, HV, router and all that live in the basement, and the main PC will be moving there so would be easy enough to do some fiber runs there, and it’s all short. I think the longest would be 15 feet. Thanks!
Hmm that’s true. I’ve been researching used enterprise 10Gb SFP switches after one of the comments and I think that’s the way to go. And yes, in the tests I’ve ran on the ISP router, I get the full advertised speed. Can’t test above 1Gb on the other devices, but even through a VPN it averages 0.9Gb down/up.
I get it. I’ve actually only recently upgraded to the 3Gb plan because it was only another $5 per month over the 1.5Gb plan I had, so just trying to sort out next steps. Probably should have mentioned that in my post ☺️. I will definitely leave the PCs that are used for browsing/basic gaming/yt on 2.5, no need to change anything there as I doubt they will ever saturate 1Gb. After some of the posts here and more research, I definitely want the NAS and my main PC on 10Gb, and it should only cost a little more than planned. The HV uses a USB 3.0 Ethernet adapter, but I see there are some 5Gb ones available that will double the bandwidth.
Oh that’s a good point about the diagram. I just threw these together real quick to help show what I mean. Yes the ISP hardware gives me a 10Gb RJ45. I’ve been researching 10Gb networking today and I think that’s the play. How come you think a managed switch would be a pain? Just from a setup perspective?
Modem <-> switch <-> wifi router is what I was thinking to do as in my second diagram, with the wifi router handling the DHCP, but now you have me thinking if that makes sense at all.
So the 5 port switch I have does exactly what you say, but the area is also in a spot where I have easy access and can add a couple more LAN drops in a matter of minutes.
Good tip, if I add an AP I will definitely wire them together. Thanks!
I’ve got a reverse proxy set up to handle the traffic of the services I want accessible outside my network, and port 80/443 open to be able to access them.
I could definitely use the ISP router as well, and just add a 2.5/10G switch, but it is very limiting and when I first tried it, it would reset my settings every time the IP changed (anywhere from 1 week to 1 day). I definitely want the NAS, HV and my main PC on a faster connection.
Similar situation here. Lots of ghosting, or unmatching the day of a scheduled date. Had two dates in the last few months of using the apps. First woman was about 15 years older than her pics. Not unattractive by any means, but felt lied to from the get go. The other, let’s just say she had some work done after most recent pics, and the surgeon shouldn’t be practicing.