I’m still mostly using Windows on my main PC. I’ve got a few jobs to finish before I switch, but the main one is scanning old photos from the 80s and 90s. I’ve tried lots of different scanning software on Linux, but I can’t find anything that works as well as the Epson software that was bundled with the scanner.

It’s got a few one click fixes for bad exposures that work really well too, so things like that orangey reddish cast that some photos have is fixed almost automatically. It can all be done easily in other software, but the time saved by doing it in the scanner software is massive.

Thanks 🙂

Thank you 🙂

Immich on its own looks good, but if I set it up, I think I’ll definitely install lightGallery to go with it 🙂

You can see [a live demo here](https://immich-demo.note.sx/share/ffSw63qnIYMtpmg0RNvOui0Dpio7BbxsObjvH8YZaobIjIAzl5n7zTX5d6EDHdOYEvo), which is serving a gallery straight out of my own Immich instance.

Sorry, off topic, but is this what Immich looks like out of the box, or have you used any other plugins?

Immich Public Proxy looks like exactly what I want for my family photos, but I haven’t looked into Immich yet. The demo looks beautiful, and is simple enough for the grandparents to use 🙂

No problem, hope you all enjoy your gaming 🙂

I’ve found codes for the family pass on legit key selling sites for around the same price as an individual key, so it’s worth checking before you buy 👍

I’ve just checked the boxes, and Minecraft, Super Mario Bros. U Deluxe, and Mario Kart Deluxe 8 all support one player on the Switch Lite, up to four through the TV, and up to four on the non lite Switch 👍

This is excellent advice 🙂

The only part I might disagree with is this:

Get Switch Lites for anyone who REALLY needs to be playing something else independently when the TV/“main” Switch is in use

Obviously only if the budget allows, but if your kids are at the age where they’ll take their Switch when they visit friends or family, then the version with detachable controllers is probably better.

The Switch has a built in kick stand, and some games, like Mario Kart, let you disconnect the controllers and have one each for a two player game. It’s handy for keeping the kids quiet for a bit, and you don’t need to carry loads of stuff.

If the kids regularly go somewhere, like your parents perhaps, you can buy an extra dock to plug into the TV there, and the non lite Switch can use it in exactly the same way as the one at home. There’s nothing special about the dock, it essentially just connects the Switch to the TV.

It’s a great little console with some fun, if sometimes expensive games. I play mine probably as much as my kid plays theirs 🙂

Yeah, this is how I understand it too. From the end user’s point of view, there’s just one wifi network throughout the building or property. It doesn’t matter if there’s a cable running between the access points, that’s all invisible to the user.

Sorry, I forgot to reply sooner >.<

I’ve been trying to get my head around this and also looking into Docker containers with Gluetun, as that looks a bit easier to start with. I think for the moment I’m going to go down the Docker route, and at least get the bulk of the programs separated, and give myself some breathing space to learn a bit more.

Docker isn’t ideal, as not everything has a Docker version, but the main programs that I originally mentioned do, and it will let me open the Minecraft servers to the kids in the extended family, especially as it’s getting colder and darker here.

I just want to say thank you to you, @jet@hackertalks.com, @lungdart@lemmy.ca, and everyone else who’s helped :)

I’m not giving up on this, I’m just going a bit more towards the basics and learning to walk before I try to run. This switching from Windows malarkey is hard work! ;)

Thanks for replying :)

I think I’m getting it, but my brain is definitely pickled at this point :D

I’ve also found this post and a Stack Exchange thread to go with it, and it’s sinking in slowly

https://schnouki.net/post/2014/openvpn-for-a-single-application-on-linux/

I need to go to bed for the night though, I’ve just realised that it’s gone 3 am :o

Thank you :)

The reply from @jet@hackertalks.com below lead me to the man page for ip netns here:

https://manpages.ubuntu.com/manpages/trusty/man8/ip-netns.8.html

As far as I understand it, I could run programs like this:

ip netns exec vpn ~/qbittorrent/start.sh

ip netns exec clear ~/minecraft/start.sh

but I can’t figure out how to get the VPN to only run under the namespace. When I run it now, it reroutes all connections through it. I’ve got an OpenVPN connection that I’ve set one of my network connections to connect to automatically, but it doesn’t seem to make a difference. As soon as I connect the VPN, everything goes through it.

I’m still reading though, so hopefully I’ll figure it out :)

Apologies for the slow reply :)

These are the things that I don’t understand. When you say I need to specify the destinations, does that mean the destination of the traffic, like lemmy.dbzer0.com, or the destination network interface like tun0 or enp2s0?

I’m searching for split tunnel VPN, but the majority of results are either sales sites, or Stack Overflow with no confirmed answers.

I’ve been having a bit more luck with this page after searching for Jet’s answer below:

https://manpages.ubuntu.com/manpages/trusty/man8/ip-netns.8.html

but I’m still confused >.<

Not if it stops my head from exploding :D

Apologies for the slow reply :)

I’m reading up on this at the moment. If I’m understanding it correctly, I would run that command to launch a program, but could I use it for something that launches at startup?

My Minecraft and Qbittorrent instances start automatically, so could I change them to something like

ip netns exec vpn ~/qbittorrent/start.sh

ip netns exec clear ~/minecraft/start.sh

or change the application’s autostart Command box to ip netns exec vpn qbittorrent %U if the current entry is just qbittorrent %U

Do these make sense?

If you’re on a time crunch, go ahead and use network namespaces under network manager to set up something like what you want as another user suggested.

I’d love to, but I have no idea how >.< :D

I have a vague idea of what they are and what they do, but everything I’ve found assumes a level of understanding that I don’t have yet. I’ve found this man page from searcing an example posted in another reply, and it’s helped, but I’m still confused :)

https://manpages.ubuntu.com/manpages/trusty/man8/ip-netns.8.html

Apologies for the slow reply :)

To clarify, I’m happy with using either, if my network traffic is split. Ideally I want to switch a lot of my programs to containers at some point, then switch to a better server OS. In the meantime though, I just want to get everything working together.

Qbittorrent has to be behind the VPN, and that’s stopping my Minecraft servers from connecting to the outside world. If there’s a way to force Qbittorrent to be behind the VPN while leaving a non VPN connection open, I’m happy to use it. I only mentioned Gluetun because I’ve heard of it, and I know that it’s for keeping containers behind a VPN. I thought it might be the answer here :)

That’s a great idea, thanks :)

This is all very helpful, thank you :)

Any Creative Commons license will require the festival to list a credit for your work. That might not be an issue for the app or website, but the festival might not be interested in listing “poster by Tippon, used under a Creative Commons 4.0 license” every time they use something you created on social media, in print, or advertising.

I didn’t know about that. I thought they might have to credit me, but didn’t know that it would need to be on the work itself. I definitely don’t want that. I hadn’t thought about third parties either. I doubt that anyone would try to rip us off, but I don’t want to leave that door open either, just in case.

I’m not overly concerned with future clients, as I’m medically retired and just doing this as a learning exercise. There’s a tiny chance that I might get future work from this, but I’m more concerned with not cutting myself off from using the website / app template if I was to fall out with the festival at some point. As you say though, I don’t want to leave either me or the festival open to having the content stolen either.

I’ve just realised that I need to double check how to handle third party images too. We have some local businesses who support the festival, so we use their logos as links on the site. If I include them in the repository, I don’t want to accidentally give them away.

I’ve got some reading to do! :D

This is a good point, thank you :)

I was thinking along the lines of not restricting myself from using my own work in the future, but I hadn’t thought about third parties being able to use it too. I’m not concerned about other people using the code behind the website, for example. I’m still learning, so it’s probably more spaghetti than anything decent, but @jqubed@lemmy.world pointed out in their reply, I wouldn’t be able to stop anyone from using graphics etc.