• centof@lemm.ee
    link
    fedilink
    English
    arrow-up
    35
    ·
    1 year ago

    I often see articles about the effects of microplastics, but I have yet to see or read about the best steps we can take to combat them.

    Can anyone recommend some content that describes ways to reduce exposure or share the most effective ways there are of reducing microplastic exposure?

    • freebee@sh.itjust.works
      link
      fedilink
      arrow-up
      49
      arrow-down
      2
      ·
      1 year ago

      Don’t heat food in plastic in the microwave. Put in the effort to put it in glass or a plate or so, then heat.

      Don’t store hot leftovers in plastic.

      Don’t buy and drink plastic bottled water.

      If you can in the stores in general chose between food and drinks packaged in glass or cardboard vs anything else: chances are glass or cardboard packaging is the healthier choice. Aluminum cans should still be okayish too, tho they possibly layered it with plastic inside too depending on the pH of the contents to slow down reactions between can and product.

      • EmpathicVagrant@lemmy.world
        link
        fedilink
        arrow-up
        14
        arrow-down
        5
        ·
        1 year ago

        There is no living creature and no source of water without microplastics in it. Newborns have it in their blood and ground water has concentrations of it.

        • freebee@sh.itjust.works
          link
          fedilink
          arrow-up
          9
          ·
          1 year ago

          yes, that is correct. I never said it would bring your intake to zero. But those appear to be big ways of microplastic intake we can control: food+packaging and food+heat. Harder to control the air you breathe in the city…

          • EmpathicVagrant@lemmy.world
            link
            fedilink
            arrow-up
            2
            arrow-down
            3
            ·
            1 year ago

            Oh i know you weren’t looking for zero, but reduction and end-user changes won’t fix the issue any more than a bandage on a leaking tire in a flood. It’s just like other pollution issues, it has to be cut off or regulated at the source.

        • paraphrand@lemmy.world
          link
          fedilink
          English
          arrow-up
          2
          ·
          1 year ago

          Is it really rated for micro plastics? Or is it rated for chemical leeching?

          Seems you can easily accidentally scrape off micro pieces of plastic from any container I assume is intended for reuse or food storage.

    • PowerCrazy@lemmy.ml
      link
      fedilink
      arrow-up
      42
      arrow-down
      4
      ·
      1 year ago

      Ban plastic. There is literally no other way. Nothing you do on an individual level will have the slightest bit of impact at all. Government has to treat plastic like Freon/DDT or any other chemical that was banned world-wide because of huge unexpected impact.

      • explodicle@local106.com
        link
        fedilink
        English
        arrow-up
        13
        arrow-down
        3
        ·
        1 year ago

        They can’t ban literally all plastic; it’s irreplaceable in some medical applications.

        • argv_minus_one@beehaw.org
          link
          fedilink
          arrow-up
          7
          arrow-down
          1
          ·
          1 year ago

          It’s irreplaceable in a lot of applications. There’s a reason we’re using so much of it. Even in applications where it can be replaced, doing so would result in burning more fuel to transport the other, heavier material, accelerating global warming. Lose-lose.

        • Corkyskog@sh.itjust.works
          link
          fedilink
          arrow-up
          5
          arrow-down
          3
          ·
          1 year ago

          It’s also likely an uneccessary nuclear response to the situation. I doubt every plastic is as bad, do studies and ban the worst/least useful plastics and work your way from there.

          I mean synthetic textiles alone make up almost half of the plastic in the ocean.

    • Fordry@lemmy.world
      link
      fedilink
      arrow-up
      21
      arrow-down
      1
      ·
      1 year ago

      Use natural fiber clothing only, no polyester, just cotton or whatever other natural fibers. Try to use less packaged food. But one of the major sources of microplastics is tire wear from vehicles, not sure what can be done about from a personal level other than not drive, which, I mean, who’s really gonna do that?

      • BraveSirZaphod@kbin.social
        link
        fedilink
        arrow-up
        11
        arrow-down
        2
        ·
        edit-2
        1 year ago

        Most societies actually got around perfectly fine for most of history without driving. It’s really only in the past seventy years or so that urban planners brains collectively escaped their heads and started designing cities where it’s impossible to do anything without exploding some old dinosaur goo in a giant expensive death machine.

          • BraveSirZaphod@kbin.social
            link
            fedilink
            arrow-up
            2
            ·
            1 year ago

            Because their cities were designed in sensible ways where that wasn’t necessary.

            Parts of the country are still halfway reasonable. I’m in Manhattan, and can walk twenty minutes to Penn Station, where I can hop on a train and be in downtown Philadelphia in under two hours. I can get to most places in NYC by subway faster than you could drive there. A train to the airport can get me anywhere in the world.

            None of this requires a car, and air travel aside, this was how most of the developed world was set up for the past several hundred years.

      • yumpsuit@lemmy.world
        link
        fedilink
        arrow-up
        8
        ·
        1 year ago

        tire wear from vehicles, not sure what can be done about from a personal level

        One more reason to wear a well-fitted respirator

        • Drusas@kbin.social
          link
          fedilink
          arrow-up
          3
          ·
          1 year ago

          Unfortunately, all of the best fitness wear is polyester or otherwise plastic based. And it’s so far superior to the alternatives that there is no switching away from it.

          • Franzia@lemmy.blahaj.zone
            link
            fedilink
            arrow-up
            0
            arrow-down
            1
            ·
            1 year ago

            I just remembered there are some great products made of bamboo, wool, or hemp! Yah, the vast majority of great products are plastic. Perhaps one day we’ll have like a scale or way to know if basically the product lasts or if it will shed a lot of plastic. That way we could switch to great plastic rather than stop using it entirely. Oof.

      • barsoap@lemm.ee
        link
        fedilink
        arrow-up
        2
        ·
        edit-2
        1 year ago

        Let me think. Ah: We could actually solve two problems at once, microplastics and rolling resistance, by using steel wheels on steel streets. Make a street lane two beams of steel, that saves on material, and the wheels conical so that they follow those beams automatically, replacing the car’s differential. In case we need more grip we can spray sand, though as the street is now steel we can also use magnets for breaking. I should patent that!

      • centof@lemm.ee
        link
        fedilink
        English
        arrow-up
        4
        arrow-down
        2
        ·
        1 year ago

        Hmm, interesting regarding them coming from vehicles. As far as microplastics from clothing, does anyone know if they are absorbed through the skin? I would think they would only readily be absorded thought food and water intake, but I am just surmising.

      • 𝒍𝒆𝒎𝒂𝒏𝒏@lemmy.one
        link
        fedilink
        arrow-up
        1
        ·
        1 year ago

        No polyester is difficult 😭 do you know if there any other natural fibers somewhat comparable or breathable, for cycling etc.?

        No driving is easy for me right now - my car has two wheels and I’m the engine 🚲🤪

      • Case@unilem.org
        link
        fedilink
        English
        arrow-up
        1
        arrow-down
        1
        ·
        1 year ago

        Not driving isn’t an option in my area. Not if you want to be employed.

        Its a 30 minute drive to the bus stop to get to work. Plus travel time along bus stops.

        Its a 35 minute drive to the front door.

        If its still half an hour to just get to the bus stop, what’s the point even, at a personal level?

        Captain Planet told me in the 90s what was gonna happen. Corporations just took it as a play book to accelerate shit.

    • MacroCyclo@lemmy.ca
      link
      fedilink
      arrow-up
      7
      ·
      1 year ago

      The two largest sources of microplastics are clothing and car tires. Clothing is a pretty easy fix. Only buy natural fibers like cotton, wool, etc. For car tires you will have to drive less. These two sources account for more than half of microplastics.

      • setVeryLoud(true);@lemmy.ca
        link
        fedilink
        arrow-up
        4
        ·
        1 year ago

        Natural fibers are often outside the price range of the average person. Until prices come down or wages go up, people will keep wearing polyester clothing.

        For tires, I’m hopeful that technology will improve the composition of tires, or even make them out of a modified form of natural rubber, but switching most transport to rail seems like the superior option here.

        • MacroCyclo@lemmy.ca
          link
          fedilink
          arrow-up
          1
          arrow-down
          1
          ·
          1 year ago

          ??? Cotton is usually the cheapest thing I see.

          Even natural rubber makes microplastics.

          • setVeryLoud(true);@lemmy.ca
            link
            fedilink
            arrow-up
            2
            ·
            1 year ago

            Companies love to charge a premium for cotton here (Canada). I try to get Cotton, Linen and Hemp as much as possible, but I end up paying $80 for a t-shirt instead of $30.