Banana Pi BPI-M7 - A thin Rockchip RK3588 SBC with dual 2.5GbE, M.2 NVMe storage, HDM 2.1, and more - CNX Software
www.cnx-software.com
Banana Pi is working on the upcoming Banana Pi BPI-M7 SBC powered by Rockchip RK3588 SoC whose low profile design reminds me of boards from Khadas such as

The Banana Pi BPI-M7 single board computer is equipped with up to 32GB RAM and 128GB eMMC flash, and features an M.2 2280 socket for one NVMe SSD, three display interfaces (HDMI, USB-C, MIPI DSI), two camera connectors, dual 2.5GbE, WiFi 6 and Bluetooth 5.2, a few USB ports, and a 40-pin GPIO header for expansion.

  • MangoPenguin@lemmy.blahaj.zoneEnglish
    13·
    1 year ago

    I dunno, this is going to be expensive, unless you need the GPIO or the smallest size possible I'm not sure what the advantage is over spending $150 or so on one of those mini Intel N100 boxes with dual 2.5GbE, they are x86 so can easily run normal software like Opnsense or similar without worrying about support going away down the road.

    Or without 2.5GbE just one of those $60-80 8th gen Dell/Lenovo/HP USFF PCs off ebay.

    SBCs just don't seem very competitive currently because they're quite expensive for what you get, and require specialized software releases, plus stuff like hardware transcoding never seems very well supported even though the chip can technically do it.

    • TCB13@lemmy.worldOPEnglish
      57·
      1 year ago

      So you share my opinion: https://lemmy.world/comment/5500098:

      For eg. for 100€ you can find an HP Mini with an i5 8th gen + 16GB of ram + 256GB NVME that obviously has a case, a LOT of I/O, PCIe (m2) comes with a power adapter and outperforms a RPi5 in all possible ways. Note that the RPi5 8GB of ram will cost you 80€ + case + power adapter + cable + bullshit adapter + SD card + whatever else money grab - the Pi isn’t just a good option.

      I even went further on GPIOs and low level electronics here https://lemmy.world/comment/5500638:

      RPi 2B+ for around 10$ nowadays (…) other brand new cheap SBCs such as the Radxa Zero 3W or the Zero 3E or even the Raspberry Pi Zero W. The point is that it doesn't make sense to buy a standard and expensive RPi for things that don't require much CPU. If you don't really need an OS and you code C or MicroPython a 3.5$ ESP32 board as well.

      • bruhduh@lemmy.worldEnglish
        5·
        1 year ago

        I agree with you, i wanted raspberry pi for my EE practice in uni but it was way too expensive for what it gives and i bought raspberry pi pico 16mb type c for 2$ on sale, for those who want compact pc to tinker with it's better to buy used mini pc because it'll be much better bang for the buck