So, i got persuaded to switch from a "server that is going to do everything" to "compute server + storage server"

The two are connected via a DAC on an intel x520 network card.

Compute is 10.0.0.1, Storage is 10.255.255.254 and i left the usable hosts in the middle for future expansion.

Before I start to use it, I'm wondering if i chose the right protocols to share data between them.

I set NFS and iSCSI.

With iSCSI i create an image, share that image on the compute server, format it as btrfs, use it as a native drive. Files are not accessible anywhere else.

With NFS i just mount the share and files can be accessed from another computer.

Speed:

I tried to time how long it takes to fill a dummy file with zeroes.

/iscsi# time sh -c "dd if=/dev/zero of=ddfile bs=8k count=250000 && sync"
250000+0 records in
250000+0 records out
2048000000 bytes (2.0 GB, 1.9 GiB) copied, 0.88393 s, 2.3 GB/s

real    0m2.796s
user    0m0.051s
sys     0m0.915s

/nfs# time sh -c "dd if=/dev/zero of=ddfile bs=8k count=250000 && sync"
250000+0 records in
250000+0 records out
2048000000 bytes (2.0 GB, 1.9 GiB) copied, 2.41414 s, 848 MB/s

real    0m3.539s
user    0m0.038s
sys     0m1.453s

/sata-smr-wd-green-drive-for-fun# time sh -c "dd if=/dev/zero of=ddfile bs=8k count=250000 && sync"
250000+0 records in
250000+0 records out
2048000000 bytes (2.0 GB, 1.9 GiB) copied, 10.1339 s, 202 MB/s

real    0m46.885s
user    0m0.132s
sys     0m2.423s

what i see from this results:

the sata slow drive goes at 1.6 gigabit/s but then for some reason the computer needs so much time to acknowledge the operation.

nfs transferred it at 6.8 gigabit/s which is what i expected from a nvme array. Same command on the storage server gives similar speed.

iscsi transfers at 18.4 gigabit/s which is not possible with my drives and the fiber connection. Probably is using some native file system trickery to detect "it's just a file full of zeroes, just tell the user it's done"

The biggest advantage of NFS is that I can share a whole directory and get direct access. Also sharing another disk image via iscsi requires a service restart which means i have to take down the compute server.

But with iscsi i am the owner of the disk so i can do whatever i want, don't need to worry about permissions, i am root, chown all the stuff

So… after this long introduction and explanation, what protocol would you use for…:

• /var/lib/mysql - a database. Inside a disk image shared via iscsi or via nfs?

• virtual machine images. Copy them inside another image that's then shared via iscsi? Maybe nfs is much better for this case. Otherwise with iscsi i would have a single giant disk image that contains other disk images…

• lots of small files like WordPress. Maybe nfs would add too much overhead? But it would be much easier to backup if it was an NFS share instead of a disk image